Resetting your Verizon MI424WR router to the factory defaults Resetting your Verizon MI424WR router to the factory defaults You may be instructed by a Verizon technical support person to reset your modem in order to clear any existing properties. You may also have to reset your router to the factory defaults if you have forgotten your router user name or password. • Note: Resetting your router to the factory defaults not only changes your router user name and password to the factory default values, but it also deletes all your home network settings. This includes the SSID and network encryption key (WEP, WPA or WPA2).

After you reset your router to the factory defaults, your home network won't be accessible until you reconfigure your router and all your network devices to use the same SSID and encryption key. To reset your Verizon router: • With the power on (Power LED on front panel should be lit green), use the pointed end of a paper clip to press and hold the Reset button for 10 seconds. • Release the Reset button. The Verizon router will automatically reboot itself. • Wait 15 seconds before resuming setup. • Your Verizon MI424WR router is now using the default settings for the network configuration. This includes the default SSID and network encryption key (WEP, WPA or WPA2).

You must to match the previous settings that were assigned to all the other devices on your wireless network. Otherwise, no other network devices will be recognized.

Oct 03, 2011 Even after doing a hard reset. Can't get Yahoo on my Verizon Motorola Q. (HotSpots/MiFi, USB Modems, Netbooks, etc.).

By A warm welcome to the HTC innovation hard reset page. On this page I include instructions for the hard and soft reset of both the HTC Artemis (P3300) and the HTC Wizard (Prodigy). Locate and press the reset button on the lower left hand side of your device using your stylus. Your device will restart and display the today screen. Use one hand to press and keep held down the left and right soft keys at the same time and then use your stylus to press the reset button – located on the lower left hand side of your phone. Release the reset button but continue to press the left and right soft key buttons.

You can release the soft key buttons as soon as you see the following message on your device: “Press Send to restore manufacturer default, or press other keys to cancel. “ Please note that as soon as you press this button that your device will be set back to default factory settings so make sure that you have backed up all of your programs and data prior to performing this action. I tried to compile information on how to hard reset most Windows Mobile phones. If I am missing any device please let me know using the on this blog. I will keep this updates with new phones as they become available.

Sprint Touch – Hard reset is done by holding the green and red buttons and then pressing the small button beside the USB plug Motorola Q9c – Power on holding the center button and it will ask you if you want to hard reset. Mogul – Hold soft keys while pressing reset button on the side Verizon Motorola Q – Power on holding the center button and it will ask you if you want to hard reset. Motorola Q9M – Power on holding the center button and it will ask you if you want to hard reset.

AT&T Blackjack – Just power on holding up on the DPad and it will ask if you want to erase all data. Press 1 to erase and y to confirm Cingular 3125 – Go to Accessories in the Start menu and select Clear Storage. If you can’t access the menu turn off the phone, and hold both soft keys while powering on.

Motorola Q9 Global – Turn on the phone while holding the E and Z keys. AT&T Tilt – While holding down the two soft buttons on the front of the phone (above the Windows and OK buttons) press the reset button with the stylus for a second. Palm Treo 750 – While holding the red “end-call” button press the soft reset button next to the mini-SD card slot for a second or two. Cingular 8125 – While holding down the two buttons on the side of the phone (top right and top left – Comms and Voice) press the reset button with the stylus for a second. T-Mobile Dash – Turn off the phone. While holding both soft keys press the power button and hold for about two seconds, then let it go. When the confirmation message comes up you can release the soft buttons.

Wing – Hold both soft keys while pressing the rest button on the side of the phone. Shadow – I guess you could hold both soft keys and press the rest button Others HTC Devices – Fot most HTC phones hold both soft keys while pressing ghe reset button or powering up HP iPAQ 910 – Press and hold the voice recorder button (on the left side) and the OK button (on the right side) simultaneously, then press the Power button.

Hold all three buttons until you see the Clean Boot screen. HTC Diamond – With the phone on, hold volume down and the round key, then press the soft reset button on the back of the phone. A message will appear asking to press volume up to do a hard reset. Many phones have a “Clear Storage” or some other master reset application in the Accessories folder under Start menu Thanks to gekko and Matt for the comments. If you have a charged battery insert it and power the phone. If it hangs or whatever then (with the phone powered on, regardless of what's been displayed) keep on the keypad the two dashes ( - ) pressed and do a reset with the stylus. Do not leave the two buttons untill a black screen appears and ask you to press send (the green call button).

Press it and you are done. If your phone doesn't have a hardware damage it should start. It will start from scratch again so you might be a bit patience. Answered on Jul 21, 2012.

Open Settings. You can find Settings in the app drawer or by tapping the cog icon in the upper-right corner of the notification shade. Select Security. Tap Screen Lock.

If you have an existing secure unlock (pattern, PIN, password or fingerprint scan) you’ll be prompted to enter it before you can disable the lock screen. You have now removed your lock screen completely; when you power on your phone in the future, you will be immediately taken to whatever screen was active when you last used the device. • • • • If this question (or a similar one) is answered twice in this section, please click here to let us know. On occasion, HTC Pocket PC Phone users have experienced problems with the phone locking up, preventing them from operating the phone or turning it off manually. A 'hard reset' will return the phone to working order, restoring it to factory defaults (Windows Mobile Software and pre-installed applications).

Turn the phone's power on. Press and hold the top Left and Right keys (the two keys above the Send and End keys). While holding the top Left and Right keys, insert an end of the paperclip into the reset hole, located on the bottom of the phone. A warning prompt will appear on the screen, confirming whether you want to do a hard reset.

Press R for 'Yes' and X for 'No.' This discussion closely relates to: We need your help! Please help us improve our content by removing questions that are essentially the same and merging them into this question.

Please tell us which questions below are the same as this one: The following questions have been merged into this one. If you feel any of these questions have been included in error help us improve our content by splitting these questions into seperate discussions. Please unmerge any questions that are not the same as this one. All you can do is to reset your phone.

There is no way to by-pass the password, which is kind of the idea behind the password lock. This is how you hard reset most HTC Windows Phones: If you can turn off the phone do it. For unresponsive or frozen phone, remove the battery and put it back again after few seconds. • Press Volume up button and hold then press Volume Down button and hold and then press the power button (briefly) to switch the phone on. • Keep holding the volume up and volume down buttons until you see a reset screen option. • Now follow the instructions that will show up on your mobile screen to factory reset your phone.

Please click 'Me Too' if you found my answer helpful. Follow me on Twitter: @ThisIsMetro. (Photo Credit: John Karakatsanis) It is one of the fastest growing companies in the mobile device market and has been the industry leader on a number of key mobile device innovations. HTC’s mission is “to become the leading innovative supplier of mobile information and communication devices by providing value-added design, world-class manufacturing and logistic and service capabilities.” Acting on this mission statement the company is known to allocate twenty-five percent of its workforce to research and design activities. HTC have formalized their innovation process with innovation centers that they call “Magic Labs”. The innovators that work within the labs are called magicians and the chief marketing officer; John Wang who also doubles up as the company’s chief innovation officer is called the “Chief Innovation Wizard”.

The labs don’t enforce product ship deadlines as this kind of pressure can stifle the innovation process. Diversity is an essential element for innovation to flourish and therefore the labs incorporate employees from diverse backgrounds, specialties and expertise. HTC magicians pride themselves on being able to create hundreds of ideas. Many ideas are put forward in the regular brainstorming sessions that they hold.

Prototypes are created for the best ideas in order to prove the validity of the idea or concept. HTC expect to kill ninety-nine percent of their ideas and therefore they pride themselves on being able to fail quickly.

The prototypes they create help them to determine if their visions are workable. Options Market Making Baird Pdf Free Download Programs. Failures result in new learning. Back in 1999 HTC was responsible for the first color palm-sized personal computer, in 2000 created the first Microsoft pocket PC and wireless pocket PC two years later in 2002.

They were also the first to use a large 2.8 inch TFT touch-screen liquid crystal display. In 2005 they created the first Microsoft 3G phone and the first Windows Mobile 5.0 platform phone. The first Microsoft Windows 5.0 smartphone was created by them in 2006. They developed a Tri-band PDA with the first intuitive fingertip navigation touch screen technology in 2007. HTC manufactured the first Google phone. Also in 2007 HTC developed a mobile product with their trademarked technology “TouchFLO” this technology enables users to swipe their finger across the devices screen to get to the content that they are looking for. HTC actively assist the developer community with resources to build new innovative applications for their smart mobile devices with a specifically set up for that purpose A video of one of HTC’s 2011 offerings the HTC sensation is shown below If you're looking for how to reset your HTC innovation device then please visit the page.

Can't find what you're looking for? Search the rest of the site below.